Larsen SLC 2500 External Commercial Screed – Self Levelling CompoundCoverage: Approx 3m2 /25kg pack @5mmLarsen SLC 2500 product informationFORM:PowderCOLOUR:GreyHAZARD INFORMATION:Consult Safety Datasheet before useCLEANING:Clean tools, equipment etc. using warm water. Mechanical means are necessary when the product has set.PACKAGING:25 kg multiwall, sealed paper sacksSTORAGE CONDITIONS:Store in sealed containers in dry conditions, protected from extremes of temperatureSHELF LIFE:6 months in unopened manufacturer’s packagingLarsen SLC 2500 application informationMIX PROPORTIONS:Mix 25 kg pack with approx. 4.5 – 5 L waterPOT LIFE:Approx. 30 minutes @ 20°CAPPLICATION TEMPERATURE: 5°C to 30°CBED THICKNESS:5 to 15 mmTIME TO TRAFFIC:Light Foot Traffic - after 2 - 4 hours Full Traffic - after 1 - 2 days Covering - after 1 - 2 days (depending on depth and site conditions)COVERAGE:Approx 3m2 / 25kg pack @5mmLarsen SLC 2500 performance informationSHRINKAGECOMPRESSIVE STRENGTH≥30 MPaFLEXURAL STRENGTH≥7 MPaCLASSIFICATION:EN13813 - CT-C30-F7-RWA20Larsen SLC 2500 PREPARATIONDo not install if rain is expected within 8 hours or if freezing temperatures are expected within 24 hours. Protect working areas from dirt and debris until material has hardened. Surface must be concrete or screed and must be suitable to receive the screed as per current good working practices. The substrate must be sound, thoroughly clean concrete or screed. Heavily trafficked areas or old or damaged substrates should be suitably prepared (enclosed grit/shot blasting or high pressure water jetting) to provide a suitable mechanical key. All residues must be removed to provide a dry, dust free open textured surface free from laitance, surface treatments and other contamination. Air and substrate temperatures must be >5°C. The surface tensile strength of the substrate should be a minimum of 1.0 MPa.PRIMINGIt is not usually necessary to prime non-absorbent surfaces. However, to ensure satisfactory bonding, the prepared surface should be dampened down to minimize pinholing. Ensure that the surface is in a saturated surface dry condition, i.e. no visible surface water, prior to application.MIXINGAdd 4.5-5 L of clean water per 25 kg bag (sufficient to achieve target flow without bleed or settlement). Mix with a heavy-duty drill and paddle for 1-2 minutes or with a suitable continuous mixer/pump. Excess water will cause a loss of strength.APPLICATIONPour or pump the mixed product onto the prepared surface and allow the material to attain the required level. The mix has a working time of 30 minutes @20°C. Where necessary, release air bubbles with a trowel or spiked roller. This practice must be carried out within 5 – 10 minutes of application. SLC 2500 External can be applied from 5-15 mm. For isolated thickness of up to 50 mm mix 25 kg Larsen SLC 2500 with 12.5 kg clean dry 3-6 mm aggregate. To lay SLC 2500 External to falls, add sufficient water to reach a trowellable consistencySEALINGLarsen SLC 2500 External does not generally require sealing. If extra protection is required, any of Larsen sealers suitable for use on concrete can be applied, for example Acrylic Concrete Sealer.JOINTSEnsure all joints subject to movement are carried up through the Larsen SLC 2500 and filled with a suitable joint sealant. Any large or structural cracks should be repaired prior to application of SLC 2500 to reduce the risk of reflective cracking in the topping.Larsen SLC 2500 RESTRICTIONSLarsen SLC 2500 External Commercial Screed should not be applied to flexible surfaces, brick paving, bitmac or asphalt. Do not place when substrate temperatures are below 5°C or ambient temperatures are below 10°C and falling. Do not apply if ambient temperatures are above 25°C. Extra water should not be added to the mix. If the material thickens before it is applied it should be discarded. Protect from direct sun when applying and curing. Do not apply in excessively windy conditions. Do not apply during rain or when rain is forecast. Protect from frost. Do not exceed the maximum recommended water content. Categories: All Products, Exterior / Outdoor Use Self Levelling Compound and Paving Grouts, Floor Levelling Compounds - Pallet Deals, Screed Pallet Deals & Bulk Buy
