Everbuild Facades One Coat GPR 25Kg General Purpose Render

Everbuild Facades One Coat GPR extended informationConsumption: 25 kg of Everbuild Facades One Coat GPR will cover 1.7 – 1.8 m2 at 10 mm thicknessUsageMasonry and walls constructed from the following:Ultra-lightweight, lightweight & dense aggregate concrete blocksBrickClay blocks e.g. porothermStandard low and normal density lightweight aircrete blocksBreeze blocksStone/ rubble stoneShuttered concreteExpanded clay insulation blocksClean, sound, well adhered existing renderDry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocksThese substrates will require a suction control coat of Everbuild 503 SBR prior to applying Everbuild Facades One Coat GPRAdvantagesOne coat applicationOverpaintableSuitable for masonry and concrete wallsFor internal and external useWeather resistantBreathableEverbuild Facades One Coat GPR Product InformationPackaging25 kg bagsAppearance / ColourGreyShelf Life12 monthsStorage ConditionsStore in dry conditions between 5 and 25 °CEverbuild Facades One Coat GPR Technical InformationReaction to FireA1Permeability to Water Vapourμ ≤ 20Water AbsorptionW2Thermal Conductivity0.45 W/mk (tab mean value: 50%)Everbuild Facades One Coat GPR Application InformationMixing Ratio4.5-5.5 litres per 25 kg bagConsumption25 kg of Everbuild® Facades One Coat GPR will cover 1.7 – 1.8 m2 at 10 mm thicknessLayer ThicknessApply at 10-15 mm thickness using trowel or float.Ambient Air TemperatureUse between 5 °C and 30 °CLimitationsAvoid applying a thin base coat and thicker top coat as the level of shrinkage to the thicker top coat could cause the render to delaminate from the base coatTo avoid shade variations, always apply and finish the render application to whole elevations at the same timeDo not apply Everbuild Facades One Coat GPR to weak mortar or plaster coated constructionsDo not use this product on exposed vertical substrates with a backward incline above 10° – a backward incline may affect water run offDo not apply on painted substratesIf applied to concrete, it must not be covered with tiling, as additional waterproofing may be requiredSubstrate InstructionsSUBSTRATE QUALITY / PRE-TREATMENTSubstrates must be clean, sound, dust free, and free of any material that may prevent adhesionEnsure the substrate is free from oil and greaseRemove all traces of plaster, paint etc.If the surface has limited / no porosity, e.g. shutter concrete or wet/patchy substrates, or ones involving several substrates, prime with Everbuild® 503 SBR Bond diluted 3:1 with clean water and allow to dryThen add a bonding coat of 1:1 Everbuild 503 SBR Bond with clean water mixed with 1.5 parts cement and apply Everbuild Facades One Coat GPR whilst still tacky. Alternatively use Everbuild 507 Rendagrip or Parex Micro Gobetis 3000 following instructions.MIXINGMix at a ratio of 4.5-5.5 litres clean water to 25 kg bag of Everbuild® Facades One Coat GPRMix for approx. 3-5 minutes with a spiral action mixerAPPLICATIONEverbuild Facades One Coat GPR should be applied following EN13914-1 code of practice. For weatherproofing concrete blocks and masonry substrates:Apply the first coat of Everbuild Facades One Coat GPR levelled and lined to a depth of 10 mm thick and leave with a toothed trowel finishFor the second coat, apply a minimum 5 mm coat of product and finish using a stainless steel trowel or float depending on the desired effect. To apply a base coat finish for receiving tiling or brick slip finish, apply one compact 15mm thick coat and leave with toothed trowel finishFor applying onto waterproof substrates e.g. concreteApply a single coat between 7-8 mm thick, float-finishing as you progress using a stainless steel trowel, wooden, plastic or sponge float finish depending on the finish desiredFor thicker applications, apply 2 coats as for float finished waterproofing coatingFor guidance regarding machine application please contact the Parex technical department.Everbuild Facades One Coat GPR – CLEANING OF TOOLSClean immediately with fresh waterEverbuild Facades One Coat GPR Technical Video Categories: All Products, Building Supplies Pallet Deals